SNMP Settings ~~~~~~~~~~~~~ The :ref:`SNMP` sections describes how the actual SNMP monitoring is done. :: ┌─────────────────────────────────────────────────────────────────────────────┐ │ SNMP on node1 (Version 2.x.x build xxxx) │ └─────────────────────────────────────────────────────────────────────────────┘ ┌─┬───────────────────────────────────────────────────────────────────────────┐ │1│Show status of the SNMP daemon │ │2│Enable (and start) the SNMP service │ │3│Disable (and stop) the SNMP service │ │4│Start the SNMP daemon │ │5│Stop the SNMP daemon │ │6│Restart the SNMP daemon │ │7│SNMP settings │ │8│View or Change SNMPv3 USM information │ │9│Add SNMP firewall rules │ │a│Remove all persistent SNMP firewall rules │ └─┴───────────────────────────────────────────────────────────────────────────┘ Move the cursor or enter a it's corresponding number (Q to Quit) Main> System Settings> SNMP> #. :ref:`Show status of the SNMP daemon` #. :ref:`Enable (and start) the SNMP service` #. :ref:`Disable (and stop) the SNMP service` #. :ref:`Start the SNMP daemon` #. :ref:`Stop the SNMP daemon` #. :ref:`Restart the SNMP daemon` #. :ref:`SNMP settings` #. :ref:`View or Change SNMPv3 USM information` #. :ref:`Add SNMP firewall rules` #. :ref:`Remove all SNMP firewall rules` .. _show_status_of_the_snmp_daemon: Show status of the SNMP daemon ############################## :: * snmpd is running Press any key to continue .. _enable_and_start_the_snmp_service: Enable (and start) the SNMP service ################################### :: * Starting network management services: Press any key to continue .. _disable_and_stop_the_snmp_service: Disable (and stop) the SNMP service ################################### :: * Stopping network management services: Press any key to continue .. _start_the_snmp_daemon: Start the SNMP daemon ##################### :: * Starting network management services: Press any key to continue .. _stop_the_snmp_daemon: Stop the SNMP daemon #################### :: * Stopping network management services: Press any key to continue .. _restart_the_snmp_daemon: Restart the SNMP daemon ####################### :: * Restarting network management services: Press any key to continue .. _snmp_settings: SNMP settings ############# :: SNMP Location information Location: FIXME Contact: FIXME Location? (Q to Quit) : Corp INC Contact? (Q to Quit) : John Doe Use and activate the above settings? (/n): * Stopping network management services: * Starting network management services: Press any key to continue .. _view_or_change_snmpv3_usm_information: .. _usm_information: View or Change SNMPv3 USM information ##################################### :: SNMPv3 USM information User: storedsafe SHA auth passphrase: FIXME AES privacy passphrase: FIXME User? (Q to Quit) : Auth algorithm (SHA or MD5)? (Q to Quit) : Auth passphrase? (. to generate or Q to Quit) : . Auth passphrase? (. to generate or Q to Quit) : Privacy algorithm (AES or DES) (Q to Quit)? : Privacy passphrase? (. to generate or Q to Quit) : . Privacy passphrase? (. to generate or Q to Quit) : Use and activate the above settings? (/n): * Stopping network management services: * Starting network management services: Press any key to continue .. _add_snmp_firewall_rules: Add SNMP firewall rules ####################### | Input of new networks or IP addresses is somewhat modeled after how BSD handles multiple input, | e.g. use a single dot (".") alone on a line to mark end of input. :: No rules exists. SNMP access is denied. Allow SNMP access (port 161/UDP) from up to 5 networks. (Use IPv4 or IPv6 with CIDR notation, 192.168.0.0/24 or 2001:db8:cafe::/48) Network #0 (. to end input, Q to Quit) : 192.168.0.0/24 Network #1 (. to end input, Q to Quit) : 2001:db8:cafe::/48 Network #2 (. to end input, Q to Quit) : . Save the new configuration? (/n): Activate the new configuration? (/n): Rule added Rule added (v6) Old rules will not be removed until next reboot of the appliance, unless they are manually removed thru "Remove active firewall rules" Press any key to continue .. _remove_all_snmp_firewall_rules: Remove all SNMP firewall rules ############################## :: SNMP access (port 161/UDP) is currently permitted from 192.168.0.0/16 Remove all SNMP firewall rules? (/n): y Old rules will not be removed until next reboot of the appliance, unless they are manually removed thru "Remove active firewall rules" Press any key to continue